Cosmic Conservative

Rational Conservatism from the heart of America

Living

Is it time to abandon the desktop/laptop computer paradigm?

By CosmicConservative
I am almost there. I have been watching the latest tablet releases and they are finally reaching that "3rd generation" level I've been talking about for years. Several tablets come with the sort of keyboard/mouse docking station I've been expecting. Most of the serious productivity software now has web versions that don't require hefty microprocessors and cloud storage has removed the need for massive hard drives. I still think it's an "early adopter" phase for tablets, but I am a bit tired of having a desktop computer for my "normal work" and a laptop for "portability". 95% of what I do I can do on a tablet computer. Probably the most common thing I do that might still be a stretch for a tablet is photo editing. I would be thrilled to get rid of my clunky desktop and not have to synch my laptop and desktop files all the time. I've seen very nice tablets in the $500 range. On the verge of taking the plunge...

Submitted my Concealed Carry application

By CosmicConservative
So... today I had to drive all the way to our county seat, which is sixty miles from here, to apply for a concealed carry permit at the sheriff's office. You have to do that in person. They fingerprint you. Fingerprints are now taken on digital fingerprint machines. You place your fingertips on a glass sensor and it scans your fingerprints and records them. You don't even get ink on your fingers. I had to be fingerprinted at my job because I work on some government security projects, and we use the same sort of device so I wasn't unfamiliar with them, but I was surprised to find one in a tiny little sheriff's office in one of the most rural and unpopulated counties in the country. Technology really is getting cheap. Total cost for the application was $152.52, split between the sheriff's office and the state Bureau of Investigation. With the $125 I spent on the class for the required certificate that means I have now spent $277.52 on the pursuit of a concealed carry permit. And there is no guarantee that you will get one. I won't know for 7-8 weeks. Since that falls right in the Christmas vacation period, I am not expecting to know until after New Year's Day. Crossing my fingers. Although my desire for a concealed carry permit has actually declined significantly after taking the class. The simulations we were trained on were extremely realistic and sobering. Owning a gun and carrying it concealed is no small thing. It's a damn big thing. Guns are nothing to fool around with. Still, I'm gonna stick with it and if I do get the permit, I will carry the gun. I won't let my wife or kids be sitting ducks in a movie theater for some deranged maniac to use as target practice.

The ethics of 3D printing...

By CosmicConservative
Now, I'm not going to pretend all of this is new, but 3D printers take the convenience of making a real-world copy of an item to a new level. With the release of the new Makerbot Replicator (models 1 & 2) the legal and political world is suddenly taking notice of this newfangled technology. And the result has been fairly predictable. It's all about copy protection. There have even been calls by some lobbying firms to outlaw 3D printers. Especially toy companies, many of which make the majority of their profits on mass produced plastic trinkets with limited or no mechanical functionality. But before we get into the legality of 3D printing, which will assuredly end up in a morass of rhetorical argument and counter-argument, I would first just like to discuss the ethics involved. First let's abstract this thing out so that it is not tied to current or near-future functionality. Let's say, for the sake of argument, that you could purchase, at a reasonable cost, a machine that could to a 3D scan of an existing object, create a computer model of the object, then recreate the object at any scale within a reasonable range (say from less than an inch to several feet across) out of the same materials as the original, and paint it exactly as the original was painted. All at the touch of a button. What should or shouldn't you do with such a device? Should you replicate the Mona Lisa? Well, it's not likely that you would HAVE the original Mona Lisa, so let's be more realistic. Let's say you are redecorating your house and you find an exquisite light switch plate, hand-made, hand-painted and just exactly what you want. You can either buy a couple dozen of them for all of your rooms, or you can buy one and then print out copies of the rest. Should you print copies? Let's say you have a set of legos, and you want more blocks. Print them or buy them? Your daughter wants a pair of earrings just like her friend's earrings. Scan and print? You have a new birdfeeder and your neighbor wants one exactly like it, but they don't have the money, nor do they have a 3D printer of their own. Do you just print one up and give it to them, or just charge them a nominal fee to cover materials and maintenance? What are the limits of the use of the thing?

The paper bridge photo

By CosmicConservative
So, here's the photo of our paper bridge with ten full soda cans stacked on it. I think we could have stacked more. The bridge is made entirely of construction paper and cellophane tape. The bridge pillars were made by accordion folding a sheet of construction paper and then wrapping that in another sheet of construction paper. Each pillar is made from two sheets of construction paper. The span itself is made in a similar way, except that the roadway is made with two layers of accordion fold inside the construction paper "skin", oriented perpindicular to each other. This is a very strong structure that does a very good job of directing load stress to the sides and along the length of the bridge. The span is reinforced with five individual "beams" which are made of rolled up paper placed underneath the roadway. The trusses are made from 1/4 sheets of construction paper rolled up and taped to each other and to the bridge's roadway and the outer beam. We used a total of fifteen sheets of construction paper. The "theme" chosen was "green" since we were given green construction paper. We negotiated the use of a few sheets of blue, brown and yellow paper for the "decorations" which include trees, a river some butterflies and a couple of origami birds. The photo was taken by the coordinator of the event and includes a couple of co workers. Here is one of the better looking bridges made by a different team: This one just barely held it's coke can. It's legs splayed out and it almost collapsed.

Halloween cards?

By CosmicConservative
Really? People buy and mail Halloween cards? When did that memo go out?

Rockies final report

By CosmicConservative
Yeah, I gave up on the Rockies back in June if I recall, after they dropped something like 8 of 9 on a crucial home stand. Since then they have become (or remained) the laughing stock of the league with some of the most bizarre coaching decisions I've ever seen, including rotating starters out after 75 pitches, which means that as rare as a Rockies win is, even when they manage to scratch out a victory, the starting pitcher almost never gets credit for it due to pitching limits for registering a win. The Rockies are currently 63-97 with two games left to play, having won their first game in their last five last night. But what a momentous win it was! It was the win that assured the Rockies that as bad as they are, as miserable as this season has been, at least they didn't lose 100 games. The most they can lose is 99. Yay. Woohoo. Go Rockies.

The paper bridge...

By CosmicConservative
So, tomorrow our team has a "team building event" scheduled. The purpose is to become better at problem solving and "thinking outside the box". Yeah. I know. Anyway.... so the coordinator of this event has reached far outside of the box of team building exercises to pull forth .... building a bridge out of paper. So, of course, I've been doing some quick research on bridge building out of paper. The simplest way I've seen is to make paper tubes into triangular trusses which can become the sides of the bridge. That's about the quickest, strongest way to build something. It's a bit more complex to try to build a suspension bridge or an arched bridge, etc.. The bridge just has to be strong enough to hold a can of soda, and high enough for a can of soda to pass under it. We will have a team of four people and an hour to do the work. My recommendation is going to be to build two towers out of simple rolled up paper, with a platform on top. The bridge itself will be made by cutting (or tearing) paper into 1/4 size sheets, then rolling them up into tubes. Those tubes will become the triangular support beams. The "roadway" can be made by accordion folding paper and covering it up with paper with tape to hold the folds in place. That essentially becomes a bunch of triangles, which again is the fastest/easiest way to create structural strength. Then it's just assembly. So I figure the work breaks down like this (Four person team breaks down to me and T1, T2, T3) Me: Tear paper to the right sizes. I figure this will take maybe ten minutes. T1: Rolls up tubes. We'll need about sixteen, maybe twenty tubes. T2: Accordion folds paper. T3: Makes platform pieces from accordion folded paper and flat paper. Me: Final assembly I figure within 30 minutes we'll easily be done.

The mini-triathlon

By CosmicConservative
So, most of my readers probably know from comments in the past that Dadman (who comments and sometimes posts here) is my best friend from back in High School. He and I have stayed in touch over the years and try to get together every year or so just to keep up. Well, both of us have been dealing with the ravages of age, and each of us have taken steps in our diets and personal habits to do our best to maintain our health and svelte silhouettes. Sometimes more successfully than others. My efforts have mostly been around dieting but Dadman has embarked upon a more aggressive physical approach, including a regular swimming regimen. About a month ago Dadman posted something on his FB account indicating that he was going to participate in a local "mini-triathlon". This mini-triathlon in fact. And so I teased him a bit and that led to an exchange of comments on the subject which ended up with me agreeing to participate myself. My initial thought about this was that it would be an interesting experience. I would not push myself to try to "compete" in the event, but I would like to have the ability to say that I actually completed it. So the weekend before last I began my "training regimen". Which so far has mostly been taking longer daily walks and trying harder not to let my weight keep creeping back up. Today I will start doing a daily treadmill routine. As part of this, two Saturdays ago, I went to a local rec center which has an Olympic sized swimming pool where you can swim laps. I wasn't too concerned about the swimming portion, it's only 400 meters after all. And my dim memories of my misspent youth had led me to believe that 400 meters was no big deal. I used to swim all the time and was always a natural and proficient swimmer. Well. Age seems to have taken even that conceit from me. It turns out that 400 meters is a LONG FRIGGIN WAY to swim. At least for me today. It took me almost 22 minutes to swim that far, with many, many rests involved. In fact I think I rested more than I swam. Completing the 400 meters just about wiped me out. I barely was able to drag my sorry ass out of the pool and into the locker room, where I sat for ten minutes before I had the energy to shower off and get dressed. That was a pretty low point in the whole affair. This last Saturday I repeated the effort, hoping that things had improved due to my previous effort and my increased exercising. And things did improve somewhat. I was able to swim farther without dying and my overall time dropped to just under 20 minutes. But perhaps most encouraging, I was not nearly as exhausted afterwards. Still. Twenty minutes? Wow. I fully intend to participate in the event, but at this point my expectations are merely to finish the race. Even if I have to stagger across the finish line.

Contemplations on gun design

By CosmicConservative
Having shot my new 9mm pistol a couple of times and therefore cleaning it a couple of times, I can't help but evaluate and pontificate on the state of gun design and manufacture. The crucial conclusion that I've reached is that modern guns are incredibly well designed. Almost absurdly well designed in fact. Watching a gun in action, knowing nothing about the internal functions, it would be reasonable to conclude that there must be a lot of complexity in the mechanisms invovled. After all a typical modern gun, rifle or pistol, has at least two separate safety mechanisms, has a means to feed bullets into the chamber automatically, can extract bullet casings and eject them out of the gun as fast as you can pull the trigger and is very hard to accidentally set off, even in the case of dropping the gun on a hard floor. But the reality is that most of that is accomplished with just a few actual parts, parts which are designed so well that they have been relatively unchanged since 1911 when the first clip loaded semi-automatic guns were introduced. Bolt action single-shot rifles are even simpler than clip-loaded guns. For comparison my air rifle is a vastly more complex device than my powder guns. Perhaps the most complex element of a modern gun is the trigger assembly. Triggers can be pretty complicated, especially multi-adjustable triggers designed for competition or combat. But the remaining components of a gun are deceptively simple looking. My Bersa, for example, manages to handle all of the shell loading, case ejecting and safety functions with maybe ten separate parts. Maybe ten. The carriage which slides back and forth and contains the actual barrel is almost entirely one piece, with a couple of pins and levers which implement the safety features. The actual function of loading the shells, ejecting the shells and firing the gun are almost entirely performed by the interaction of five or six separate parts. Each part has been shaped specifically to engage the other parts, but each part itself has very few moving parts other than a spring or a slide here or there. The barrel itself, for example, is a single piece of metal which actually "floats" inside the carriage, held in place by the carriage and a spring-loaded rod which also manages the recoil and return of the carriage after each shot. The case extractor is similarly simple and mostly performs its functions as a consequence of its shape and the action of the carriage as it reacts to the recoil of the fired bullet. New shells are loaded the same way, when the carriage is returned to its set position, a simple prong slides the next bullet from the clip into the chamber, and the clip itself is essentially just a spring-loaded casing which shoves the next bullet up to be loaded on the next shot. You can take the whole thing apart in just a few minutes. Taking it apart enough for cleaning takes just a few seconds. All you have to do is flip a lever which disengages the carriage and allows it to be slid off the front of the lower portion of the gun, and then pop out the retaining rod and spring holding the barrel in, and you're ready to clean. I have always considered ten speed bicycles to be a marvel of engineering simplicity and robustness. I think I'll have to put guns in the same category. The level of cleverness involved in gun design is really impressive.

The Doonesbury chronicles...

By CosmicConservative
So I periodically take a tour through the mind of the modern liberal to see if I am understanding things from their perspective. I admit that I don't do this nearly as much as I used to because over the past decade it has gotten more and more difficult to stomach the vitriol and hatred that is so common on the most popular leftist blogs. But I have made myself read through the DailyKos, Huffington Post, Slate, Washington Post blog, etc. But normally I start by reading through the last few weeks of Doonesbury. I think Doonesbury is a very good view into the mind of the modern self-described liberal "intellectual." The attitudes and prejudices expressed in Doonesbury are pretty much mainstream liberal attitudes and prejudices. And after reading the last month or so of Doonesbury, I'm afraid that I don't even want to dip my toe into the more aggressive and hateful blogs. Let me tell you folks, if you are a Republican or a conservative, the typical, average, mainstream liberal totally hates you and believes you are an absolute moron. These same people who react in horror if someone criticizes a murderous Islamist zealot have no hesitation in describing a conservative as a mindless, racist, misogynist, bigoted snaggle-toothed moron. To paraphrase Sally Field, they really, really hate you. Seriously.