Cosmic Conservative

Rational Conservatism from the heart of America

Phone is working

By CosmicConservative
This is what I had to do. Actually, it didn't end there. I had to separate the touchscreen from the casing. It was all stuck together with some sorta techie tacky glue stuff that I managed to keep on the phone side so I didn't have to find new glue. Of course then I had to put it all back together again...

Comments (5)

CosmicConservative
I thought about taking some photos of the phone all taken apart, but I had a tooth crowned yesterday, was in a bad mood and just wanted to get the thing back together.... So I ended up posting the above video instead. The job was quite difficult. I've done lots of repairs to electronic equipment, including repairs involving soldering chips. I've done customizations of computer mother boards and have rebuilt entire computers from scratch. I will say that the droid's ribbon cable connections are pretty nicely done, and seem to be difficult to connect improperly (especially compared to the ribbon cable connections I've dealt with on laptops before), but an amazing amount of this phone is literally put together with tape and glue. Including gluing on entire circuit boards. The speaker assembly isn't even connected to anything, it's held in place by the casing. Putting it back together involves sticking things back together that you just pulled apart, so it is impossible to avoid getting your fingers on some of the glue components, meaning I'm not very confident that the glue will hold. These things are clearly made to be tossed in the trash when their time is up. The innards reminded me very much of a disposable camera I took apart just to see what was inside. FYI, one of the things inside a disposable flash camera is a super-capacitor, which can deliver a shock that could literally kill you. You learn a lot taking things apart... You could do some serious damage with a disposable camera if you know a bit about electronics.
CosmicConservative
Oh... just to wrap up a tiny loose end... The initial video and the "guide" from the place I bought the new touchscreen element were for a different version of the phone I have. Which makes no sense to me since it has exactly the same model number. However, that phone had different screw locations, different sized screws and contained a micro-SD card slot that my phone lacks (which is sort of concerning to me...) But after discovering that the phone in the video was apparently not the same, I did some more googling and found the above video which seems to be identical to my phone. Had I found that one first, I would have had the right tools to begin with... The torx screwdriver I bought at Home Depot to complete the repair cost me $5, so that means I ended up spending $40 on the repair. However, the $99 fix would have included tax of at least $5, so I figure it's still a $65 or so cost savings.
CosmicConservative
I love it when my own comments dominate my own post.... That's sort of like blogging self-abuse... So... it turns out that my data was recoverable since I have a google account. Not all of it, but my contact list and some other critical data that google keeps track of. I'm actually not sure if I'm happy to have discovered this...