Cosmic Conservative

Rational Conservatism from the heart of America

My Luddite tendencies...

By CosmicConservative
So, I love technology. My entire adult career has been built around technology, especially computer technology. Even today my job as a mid-level manager of a multi-national corporation is in the technology field. And I just love technology for it's own merits, apart from the, so far, decent living it has allowed me to enjoy. I love playing with computers, HDTVs, gaming consoles, GPS devices.... It's all good. But then my stove gets hit by lightning and I discover that it is irreparable because the microchip controller that runs the clock, the timer and the temperature settings is no longer made and there is no replacement controller available. Which means that the entire stove is useless because of a tiny chunk of silicon, and the only option the "repairman" gave me was to buy a new stove. Think about that. By weight the affected part is probably 1/10,000th the weight of the entire stove. But without the controller, the stove is essentially unusable. Prior to the electronics revolution a stove would more or less need to be hurled into a brick wall by a tornado before it would be "irreparable". Now all it takes is a power surge and any stove a decade or so old (ours is almost exactly a decade old) is likely to no longer have replacement electronic parts, and becomes just another potential artificial reef component. There is this place that claims to repair controllers, and I've contacted them, but if the controller was truly burned out by a lightning strike, I'm not sure how it can be "repaired." I'm hoping they can, but I doubt most people would have gone through the effort I went through to find a place that claims to repair obsolete electronic controllers. I suspect the vast majority of home owners would simply sigh and head to the local appliance store. Something's just not right with a culture which turns an entire stove into junk just because a microchip got burned out. And on top of that, charging me $65 just to come out and tell me that the controller is burned out and I need a new stove seems like good work if you can get it. grrrr.....

Comments (11)

Drax
Get the part number of the controller and do a Google search. Who knows...
CosmicConservative
Heh... that was the first thing I did. And eBay, and Amazon.com and every other place I could think of, including every internet appliance parts site I could find. That's how I found the appliance controller repair site.
Drax
Dur.... Figured as much, but, if I didn't offer the advice, I would have surely been visited by the "Man Squad" asking for my credentials.
Andy
Cosmic, I know a little bit about the stove business. Dad still messes with appliances after all these years, and I help him out. You're right. The stove itself is basically all that it ever was. Porcelain, steel, burners, etc. It's just the dang little piece that makes the hot parts start that is the difference now. The honest truth is that electronic controls on everything...dishwashers, washing machines, ranges, televisions, etc. are much more reliable than in the old days of mechanical tuners, timers and rheostat burner knobs. But, it is a pain in the backside when lightning strikes. I'm actually kind of surprised that the control panel for your range is not available after only 10 years. We replace electronic components on appliances all the time that are in that age range. But, it's expensive to do...so most people do just chunk them. Still in all, electronics have made home appliances much more reliable in the overall scheme of things...cheapness of manufacturing, ease of service, etc. (I mean, I guess when you can get the part)
CosmicConservative
The repairman said that the reason the part is no longer available is that Whirlpool bought out Amana and decided to discontinue much of the Amana line entirely, focusing instead, I think, on Whirlpool and Kenmore. So they just stopped making replacement parts for my stove as a conscious decision to save money. Forget "service the customer" or anything like that. We bought this stove in the summer of 2000. It was a state of the art stove at that time. It's a nice stove too, much too nice to be thrown into a landfill because a tiny chunk of silicon got fried. My point about the pre-electronic stoves was that when they used mechanical and basic electrical devices (gears, switches, cables, etc.) such things could always be repaired or replaced, even if you had to modify something a bit. You can't do that with silicon. You either have the chip or you don't. I suppose if I could find the actual circuit diagram of the chip I could breadboard it with some Radio Shack electronic components, but I'm sure that circuit diagram is considered proprietary property of Whirlpool and isn't available.
Andy
I know what you're saying. It's aggravating. A lot of times when Dad gets even a relatively new appliance with fried electronics, he just junks them. Strips the good parts, and tosses the shell. It's a shame. Good luck on getting it back up and running.
CosmicConservative
So, the company that repairs controllers says they "might" be able to repair it, and it would cost roughly $110 to do so. I just have to take it out and mail it to them... Then they might get to it in six weeks or so...
Andy
Cosmic, I may have missed this. But, have you seen the insurance adjuster yet? In my EXTREMELY limited experience, it seems like these guys/gals are pretty good at saying, "we'll just pay to replace this/that/the other thing." I know you're not asking for advice here. But, I wouldn't send off a controller to some guy that says he may be able to repair it some time in the next few months...especially if there is ANY money involved up front. The insurance adjuster may just pay you REAL money to get a REAL new stove. Just my dos centavos.
CosmicConservative
I've got a $1,000 deductible that I have to pay out of my own pocket before the insurance pays a dime.
ams
Well, if you're an electronics geek, for something as simple as a stove, you could build your own. I guess it depends on how much time you have to devote to "mad project" mode.