Cosmic Conservative

Rational Conservatism from the heart of America

Computer rebuild status

By CosmicConservative
Hmmm.... seems I don't know how to apply thermal paste... Was having shutdown and crashing problems so did some research, installed a temperature tracking program and saw that my CPU temp was very high. Looked up some stuff on installing heat sinks and realized I had used way too much thermal paste (and I thought I was using too little). Turns out the best way to do it is to literally use a razor blade to spread a tiny little bead of the stuff over the whole contact area. Doing so made my Core temps drop from about 60C to about 30C. So far so good.

Comments (6)

CosmicConservative
Sigh... still hanging randomly. Not the same symptoms as before the innards transplants, but the same general effect. Arg... I better not STILL have to buy another computer...
Cullen
I have a similar dilemma. Around this time last year, I bought a new computer. I upgraded the video card, sound card, and, eventually, the CPU. At some point during that process, I screwed up the CMOS. Replacing the battery didn't work. I can't flash the BIOS; the BIOS won't reset. However, the computer still works fine, basically I just can't adjust system settings in the BIOS and I have to press F2 "to continue" every time I boot. I bought a replacement motherboard, but all the headers on the board are of the four-pin variety and all the connectors on my current motherboard are of the seven/eight pin variety. Seeing as how this is the first time I've attempted to do anything more than throw in a card or CPU, it's a bit beyond me. Wish I'd just saved my pennies for a cheap system and just swapped in my upgraded components.
CosmicConservative
Well, after a couple of days and resetting the heat sink, the rebuilt computer is working much better than the old one. I can actually use it now for significant periods of time before it crashes. It was crashing within a few minutes of launching any browser or network application before. So it's an improvement anyway. I am still working on the crashes it is having. I may reload the bios and am thinking of even reloading Windows XP as well. Plus, it's a lot smaller than the old computer and isn't crushing my desk...
pace
You're a glutton for punishment, CC. I used to build my own computers too. But unless you're trying to carefully spec out a custom powerhouse machine, I just don't think it's worth it to DIY any more. Off-the-shelf PCs cam be had for dirt cheap.
CosmicConservative
Pace, yeah, but my situation was that my computer was crashing and I was told that it was due to a bad motherboard. It's a pretty powerful system, so replacing it would be over $1,000 even today. To replace just the motherboard Dell wanted $450. For $450 I can get a pretty nice computer. So believing the problem to be a bad motherboard, and desiring to be a wise financial planner, I decided to buy another motherboard that was compatible with the CPU, but that meant I had to get a new case and power supply too. Still at $175 that seemed a much better deal. If I could just figure out why it's crashing, it might still be a good deal... The problem it was having on the old motherboard is gone, the crashing is similar, but the symptoms are much different. It's probably some configuration/compatibility issue that I'll spend months trying to figure out.