Cosmic Conservative

Rational Conservatism from the heart of America

Physics of electric guitars

By CosmicConservative
Because of some comments from Cullen on building an electric guitar, I've been doing some googling of how electric guitars work. Somehow I had the idea that electric guitars were complicated electronic beasts, something along the lines of a super miniaturized radio. So when I started looking at how the electronic pickups of an electric guitar work, I was expecting to see detailed circuitry, amplifiers, filters, who knows what... I had seen guitars advertised with all kinds of features including many variations of pickups. What I learned is that an electric guitar pickup is essentially a magnet wrapped in a bunch of thin wire with a capacitor and a potentiometer (which is just a variable resister). That's it! Wow. The wire wrapped around the magnet is a "coil" and the basic pickup is called a "single-coil pickup" because it has one long piece of wire coiled around the magnets. The magnet supplies a magnetic field, the guitar strings vibrate in that field, this induces a current in the "coil" that mirrors the frequency of the vibrating string, and that generates the signal that is sent to the amplifier. The capacitor is only there because it tends to filter out high frequency noise (from upper harmonics of the string vibrating, for example), and the potentiometer controls the volume. So now I'm wondering how hard it would be to make my own pickups.... Sigh, it's a curse.

Comments (1)

Cullen
CC, that MIMF resource I've talked about has abundant information about wiring your own pickups. Even has a photo essay from one of the members making a single pickup. If you get past the initial cost of buying supplies in bulk, the cost-to-pickup ratio is amazingly cheap compared to what you pay for a pickup. Of course, there's going to be a lot of trial and error before you discover your "mojo." It's, yet another, thing I have also looked into.