Cosmic Conservative

Rational Conservatism from the heart of America

An ode to knives

By CosmicConservative
I like knives. I always have. I still have the first "real" pocketknife I ever owned, I am pretty sure my dad purchased it for me as a birthday or Christmas present. It's an old Craftsman "Old Crafty" that is still sharp as a razor. Or pretty dang close. I used to test my knives for sharpness by shaving a bit of hair off the back of my hand. I don't keep them as sharp as I used to, age has set in more ways than one. That Old Crafty was my daily knife for probably ten years, until I decided I needed a true hunting/skinning knife since I used to... well, hunt and skin. And the Old Crafty just didn't have the heft to handle the job of skinning a deer. So I bought myself a Buck model 500 (not sure what it's called today) which is a fairly small single-blade locking handle knife, and I think the first locking blade model Buck produced. I had to learn how to sharpen a Buck knife because they have a heavy edge for strength, and a concave blade to make skinning (and cutting in general) easier. You can't lay the blade flat on a whetstone to sharpen it, you have to hold it at just the right angle (about 30 degrees or so). In fact Buck sells a sharpening brace to help you sharpen their knives properly, but I've never used one. Between the Old Crafty and the Buck I was pretty much set for life with personal knifery I thought. Then one Christmas, during the Rambo craze, someone gave me a Rambo-style combat knife. I still have that one too, it's huge, the blade is probably eight inches long (the Old Crafty's longest blade is just about two inches and the Buck is maybe a bit more than three inches, but is much wider). I think I used the Rambo knife on one hunting trip, but it was so awkward on my hip that I have never really used it since. It does have a nifty compass and a compartment in its handle for holding fishing line, matches and other odds and ends. But it's out in the garage in an old tackle box now, effectively retired. Then one day one of my brothers showed me the weirdest thing. He had a black case on his hip that looked almost identical to my Buck leather case, so I assumed it was a similar locking folding knife, probably a Buck since at that time Buck was pretty much the king of outdoor hunting knives of that sort. Instead he pulled it out and it looked like two long rectangular pieces of metal side-by-side. Suddenly he flipped the rectangles around and had a pair of pliers in his hand. ! What the?! I asked him why he kept a pair of pliers in a hip case, and he said "Oh, it's a lot more than a pair of pliers." Then he showed me that the handles of the "pliers" held several tools, including screwdrivers, knife blade, can opener, leather-puncher and a file. I had to have one. So I went out and bought me one of the original "Leatherman multi-tools" which I still have today, and it still works flawlessly. Now, I can't really call the Leatherman a "knife" since it's a multi-purpose tool, but so is a Swiss Army Knife, so I'll go ahead and keep it in the same general category. Since then I've received a few penknives as gifts, but nothing has ever replaced these three basic tools, all of which are original versions of what has since become entire product lines (and in the case of the Leatherman, an actual entire industry). I keep all three with me when I go hiking or camping, although I sometimes leave the Buck behind just because it clutters up my belt now (which now also tends to hold a phone, ipod, camera and even a GPS device, so I'm sorta like Batman when I'm hiking...) But I always leave it behind with real regret. If I need to get some wood shavings to start a fire, or just want to pass the time with some old-fashioned whittling, out comes the Old Crafty. If I need to do some emergency repairs on any equipment, or fish a hook out of a fish's mouth, out comes the Leatherman. If I need to skin a deer (OK, I haven't skinned a deer in twenty years, but so what) then out comes the Buck. None of these are really appropriate at the office though, and for that reason I actually carry something else in my pocket, also from Leatherman. Originally I bought something called a "Micra" which is sort of a junior Leatherman with a set of scissors instead of a pair of pliers. I find a pair of scissors to come in handy frequently, plus it also has other tools, although it is not nearly as versatile as the Leatherman itself. But I've discovered that either these new tools are not as high quality as the original Leatherman, or the other two knives that just keep plugging along, or else scissors are just incredibly difficult to maintain. Because I can't seem to keep one that works for long before the scissors are so worn out that it is difficult to even cut paper with them. So I tried out the Leatherman "Squirt" which has a heftier set of scissor jaws than the Micra, although it's about the same size. That works better than the Micra, but still, the scissors are starting to wear out on this tool too. So, I'm wondering a couple of things. First, I'm wondering if other people (mostly guys, I suppose) have their first knife and still use it, and have a similar fondness for knives or tools they have personally used in their past for some memorable activities (I once repaired my outboard motor in the middle of a huge southern reservoir with my Leatherman tool). But I'm also wondering if anyone knows how to keep those scissors working properly once they start to degrade, or if anyone knows of a similar tool with tougher scissors that can take the abuse I heap upon them. I suppose sometime in the future I'll post something similar about my guns, or other belongings. I suppose the fact that I get attached to things like tools is an indication of my fundamental materialistic nature, but I can't help myself. I really feel like these knives (and the Leatherman tool) have grown with me. I've had all of them longer for longer than I've been married, and I'm coming up on my 21 year anniversary next month, so you can see how long I've used these tools, and kept them in my pocket or on my belt. I once shaved off an entire two year growth of beard with my Buck knife and a bar of soap. Along with these knives I also have, and have kept for just as long, an Arkansas whetstone and a diamond-impregnated edge-honing tool.

Comments (7)

Dadman
I'm getting a Leatherman tool for Christmas this year...at least I think I am...
CosmicConservative
Which one? There's about 500 now. Mine is so old it just says "Leatherman Tool".
Drax
Heh. I don't have the "first" of anything I've ever owned. They say that three moves are equal to one fire...
CosmicConservative
The only thing of any consequence I've ever lost in a move was my entire baseball card collection, which I had put in the attic of a house for some reason, and when I realized what had happened, and went back to the previous house to see if I could retrieve them, they were gone and nobody had any idea what happened to them. Just a mystery, I guess.
pace
Last Christmas I received a Leatherman 'Surge', which is significantly more capable than my five year old Swiss Army 'knife', but also considerably more hefty. It's really too heavy and bulky for me to comfortably carry in my jean pocket for any length of time, but it's proven invaluable on my dirtbike camping trips in Moab, and it has also found a home in my snowboarding backpack (I've had bindings work loose more than once). I recently took an interest in knives in general, and discovered a company out of Golden that is apparently highly regarded with tactical and hunting knife afficionados. Even better; many of their knives are actually manufactured in Golden. You have probably heard of them: http://www.spyderco.com/ Anyway, I'm eyeing up several of their knives and only wished I had put one on my xmas wishlist. Oh well, my birthday is in April.. That reminds me. I lost my first Swiss Army knife about five years ago, and found it last year in a first aid pack that I used to keep in my Jeep for offroading. I apparently had some Deet-based insect repellant in the pack, and it had leaked at some point. The plastic on my beloved red knife appeared melted, having essentially been dissolved by the chemicals in the repellant. I was bummed.
brent keller
where are craftsman knives made and where is a site i can look view old craftstman knives and their values thank you
CosmicConservative
I don't know where they are made. I think they are the same as Old Timer knives, the "Crafty" is a Sears branding for them (from the "Craftsman" line of tools). If I remember right they were made by the Schrade company, in Philadelphia maybe? A google search would probably tell you.