Here are the raw materials I started with:

Mostly it was some old wooden blocks my son used to play with but which haven't been touched in years. The arm itself is actually a chinese food chopstick. The guides for the payload are some old molding I had. I got some screws and my drill and a miter saw and went to work on it.
Here's what I ended up with:

It's functional. It throws a raisin about ten feet. I haven't really adjusted it yet, and don't know if the "counterweight" I have on it is too heavy, too light, or just about right. It's actually an old socket from a set that I don't use anymore. I think I might stop by a fishing store and see if they have any big lead weights.
It works OK, I guess, for a stationary traditional trebuchet. I was thinking about building a floating arm version but decided that was probably beyond my capability for now. I figured I'd start simple.
A few things I am considering:
1. Aligning the arm better. Right now to keep it in the center of the axle I've put some plastic christmas light clips on the nail, just to keep it from moving too far out of center, but it's not very reliable. The end of the arm is quite loose and has probably an inch and a half of wiggle room, which greatly reduces the accuracy.
2. I need to put a trigger on it. I've got a couple of ideas of how to do that, one on the arm itself, the other anchoring the pouch which holds the payload. I'm going to look up some on the net to see how they are anchored.
3. Improve the pouch and the sling strings. I had to play around with it a bit to get it to work when I first put it together, and that meant mostly changing the length of the sling itself. It seems that the heavier your payload, the shorter your strings need to be, all other things being equal. I suspect, but have not proven, that increasing the counterweight has the same effect, except that should increase the power as well.
4. I may paint it. Dunno if it's worth the effort.
It's sort of fun to play with, but not as powerful as I had hoped.
Comments (0)
No comments on this post.