Cosmic Conservative

Rational Conservatism from the heart of America

Science & Technology

Moonshot

By CosmicConservative
So I finally figured out how to use my camera's program modes and manual focusing capability. Or mostly anyway. This is a photo of the moon I took. It was too cold to mess around much, so I only took three photos (it isn't really easy to reset shutter speed or manually focus this thing, I'm afraid to say... but you CAN do it). It's not quite terrible, you can make out some features, but it's clearly not perfectly focused or exposed. I'll try again. I also want to try stacking photos using some open source stacking software called "Registack". That is supposed to allow you to get more detail by combining data from multiple images. Haven't figured that out though... And it's late, so I'm going to bed. I actually scaled it down from it's original size. The raw image had the moon in a roughly 800 by 800 pixel area. That's pretty good actually, for a cheap point and shoot camera...

The arch...

By CosmicConservative
One of the things that fascinates me is the history of civil architecture. It is probably not something that most people think about, but huge construction projects are nothing new. The oldest surviving massive structures on earth are probably the great ziggaruts of Mesopotamia which date back to well before Egyptian dynasties. There are two main things that really spark my interest when looking at ancient architecture. First is the commonality of building materials, no matter where on earth you are looking. Second is the actual means taken to build great structures. It may or may not be a surprise to readers of this blog to learn that the builders of the ancient Ziggurats of Mesopotamia would not find it difficult to adapt to modern construction methods. There is still much that is similar. In fact there are only a few really critical technological advances in large-scale construction from the late stone age until the industrial revolution. It is commonly believed that the arch was developed by Roman architects, but that's not true. Arches have been used by builders throughout the ancient world, in fact an ancient arched bridge built by the Greeks still stands today. The Romans just did for the arch what they did for lots of things, which is that they incorporated its use into large-scale building projects across the empire, where other ancient cultures tended to use the arch only as local architects incorporated it into singular building efforts. An "arch" by architectural definition is a structure which bears loads across a horizontal distance. I suppose by that definition even basic post and beam construction employs "arches". But by common understanding an "arch" would exclude post and beam and requires that the load-bearing structure involve some element which spreads the load not just vertically, but horizontally as well. What that means is that an arch is unstable unless each side of the arch is secured to ensure that the arch's endpoints do not migrate horizontally, causing ultimate collapse of the arch. Post and beam construction does not have this issue since all of the load is treated as vertical compression, so two posts supporting one beam is a stable structure, so long as the posts are secured against vibration. The thing about arches is that because they convert some of the load into horizontal forces, they can support heavy loads with the spanning section of the structure using substantially less material than could be done with straight post and beam construction. This gives the architect the opportunity to create much more visually appealing structures (since there is less material in the way of the view) and has the more important added bonus of being substantially cheaper to build as well. Arches can be extended into the third dimension in a variety of ways, but the most common are the "barrel arch" (which is essentially an arched tunnel or passageway) or the "dome" (The "Pantheon" is probably the best example of an arched dome, and was the largest free-standing dome in the world for 2,000 years, which is quite a respectable architectural achievement). Arches come in a variety of shapes, some of which have become iconic elements of entire architectural styles. Perhaps the single most obvious aspect of gothic architecture is the lancet arch, an arch which allows for extremely high vaulted ceilings, and gives a strong impression of upward movement, very conducive to religious imagery. Even today arches are critical components of modern civil architecture. Very few people appreciate that huge dams are essentially horizontal arches which exploit the redirecting of compressive forces as lateral forces which allow massive stone canyon walls to hold back the tremendous weight of cubic miles of water. Take a look at Hoover dam. It's an arch laid on its side.

The evolution of wings...

By CosmicConservative
A recent study of velociraptor and deinonychus dinosaurs has perhaps finally provided a highly plausible rationale for one of the most vexing evolutionary questions of them all. How did wings evolve? The evolution of wings has been one of the most contentious debates in evolutionary theory from the time of Darwin. It is still one of the main issues that is latched onto today by those who challenge the theory of evolution. One of the major arguments that has been difficult to answer in the past is "what use is half a wing?" This question is asked because evolution is said to occur in small steps, but wings are a major departure from all other use of limbs. So if evolution occurs in small steps, then wings should have evolved bit-by-bit. But until the wing provides actual flight, up until now anyway, the argument has been that partially functioning wings provide no evolutionary advantage, and as such would not be selected for, which would negate the further development and stop wings from ever evolving in the first place. But this study seems to me to have a plausible explanation, based on a study of velociraptor claws and comparing them to modern eagle or hawk claws.
Evolution of flapping These findings could shed light on the evolution of flight in birds, researchers said. Such feet could have led to the evolution of flapping. "When a modern hawk has latched its enlarged claws into its prey, it can no longer use the feet for stabilization and positioning," Fowler said. "Instead, the predator flaps its wings so that the prey stays underneath its feet, where it can be pinned down by the predator's body weight. The predator's flapping just maintains its position, and does not need to be as powerful or vigorous as full flight would require. Get on top, stay on top — it's not trying to fly away." In much the same way, raptor dinosaurs might have flapped their feathery limbs to keep stable. [Photos of Fossil Feathers] "We see fully formed wings in exquisitely preserved dromaeosaurid fossils, and from biomechanical studies we can show that they were also able to perform a rudimentary flapping stroke," Fowler said. "Most researchers think that they weren't powerful enough to fly — we propose that the less demanding stability-flapping would be a viable use for such a wing, and this behavior would be consistent with the unusual adaptations of the feet." "There's an old question on the evolution of flight — 'what use is half a wing?'" Fowler told LiveScience. "I think we have provided the most complete and defensible answer." Read more:
This is the sort of analysis that I like.

This Insane Giant Mothership Will Launch Rockets Into Orbit

By CosmicConservative

This is not a fantasy project. This is going to be real: a gigantic 385-foot wing span, 544-tonne plane powered by six 747 engines that will serve as a flying launch platform for 490,000 pound orbital rockets.It's the new project of Paul Allen and Burt Rutan. And it looks insanely amazing.

via This Insane Giant Mothership Will Launch Rockets Into Orbit.

Back when I was in college and had dreams of being a writer one day (huh... amazing how that dream hasn't changed much...) I wrote a short story about a launch system similar to this. In my story though I used a "skyhook" which is essentially an orbiting satellite with carbon fiber "legs" which orbits and rotates such that the legs dip down into the atmosphere and latch onto high-flying jet powered spaceships which are then launched into high orbit by the skyhook. The energy is regained by using the same skyhook to deliver refined metals mined from asteroids or the moon to the earth. It's a great idea.

Keep your fingers crossed!

By CosmicConservative
CAPE CANAVERAL, Fla. — NASA has launched its next Mars rover, kicking off a long-awaited mission to investigate whether the Red Planet could ever have hosted microbial life. The car-size Curiosity rover blasted off atop its Atlas 5 rocket today (Nov. 26) at 10:02 a.m. EST (1502 GMT), streaking into a cloudy sky above Cape Canaveral Air Force Station here. The huge robot's next stop is Mars, though the 354-million-mile (570-million-kilometer) journey will take 8 1/2 months. via Next Stop Mars! Huge NASA Rover Launches Toward Red Planet | NASA, Mars Science Laboratory & Curiosity Rover | Mars & Mars Exploration | Space.com.
Mars missions seem to be unnaturally cursed. A Russian Mars probe just failed to leave earth orbit and now sits in a decaying orbit and will fall to earth somewhere, somewhen. I looked it up some time ago, but it's been awhile. Back then though fully half of all Mars missions had ended in abject failure for some reason or another. US missions to Jupiter and the more remote planets are actually more likely to be successful than Mars missions. There are some sound scientific reasons for this. Mars is a small planet with a relatively small gravitational well, and a very thin atmosphere which fluctuates unpredictably due to solar influence.  That means that the margin for error on orbital trajectories is incredibly small. But that doesn't explain the number of Mars missions that failed to even leave earth orbit, like the latest Russian mision. This mission has a far more sophisticated rover than the Pathfinder mission rovers. The rover is the size of a mini-van and has extensive laboratory capability as well as more powerful computers and more efficient and powerful solar cells. If this does land it will mean a much better opportunity for chemical analysis of the Martian soil. I'm keeping my fingers crossed.

Climategate II - worse than Climategate I?

By CosmicConservative
Climategate scientists DID collude with government officials to hide research that didn't fit their apocalyptic global warming 5,000 leaked emails reveal scientists deleted evidence that cast doubt on claims climate change was man-made Experts were under orders from US and UK officials to come up with a 'strong message' Critics claim: 'The stink of intellectual corruption is overpowering' Scientist asks, 'What if they find that climate change is a natural fluctuation? They'll kill us all' via Second leak of climate emails: Political giants weigh in on bias, scientists bowing to financial pressure from sponsors | Mail Online.
Of course those of us who were able to objectively analyze and evaluate the first flood of leaked emails had already concluded all of the above. So this is all old news to me. Hopefully this second round will convince a few fence-sitters that no matter what the science of climate change might be, the politics of it is corrupt, anti-capitalist and, frankly, anti-humanist.

Walking through doorways...

By CosmicConservative
We’ve all experienced it: The frustration of entering a room and forgetting what we were going to do. Or get. Or find. New research from University of Notre Dame Psychology Professor Gabriel Radvansky suggests that passing through doorways is the cause of these memory lapses. “Entering or exiting through a doorway serves as an ‘event boundary’ in the mind, which separates episodes of activity and files them away,” Radvansky explains. “Recalling the decision or activity that was made in a different room is difficult because it has been compartmentalized.” via Walking through doorways causes forgetting, new research shows // News // Notre Dame News // University of Notre Dame.
I gotta say, this makes total sense to me. Memory in the human brain is thought to be so pattern dependent that it's best reproduced in holographic models. That implies that remembering something is tied to your environment, and walking through a door is pretty much the definition of changing your environment.

Barrelling along...

By CosmicConservative
So, some of you might follow my gaming blog, and if so you know that I've been working lately on small modular terrain items to spruce up a game board for game play. Well, one of the things that I've been planning to make, and am now prototyping, are scale models of barrels of various sizes. So, because I'm insane about these things, I've been researching barrel making. It's truly a fascinating subject. A barrel maker is known in the trade as a "cooper." (Heh, so if I'm making miniature scale models of barrels, I suppose that makes me a "mini-cooper"....) Coopers were one of the original trades, alongside trades like "smithing" or "tailoring" etc. Which is why you see "Cooper" as a fairly common surname in English-speaking cultures. And as with those other trades, the development of barrel making was a major cultural turning point in human society. Seriously. Major turning point. Why is that? Well, for several reasons. First of all barrels and other cooper-made objects (washtubs, pails, butter churns, etc) were the first reliable mass-produced containers for large amounts of liquids. (Or, conversely, large amounts of things that must be kept dry, like iron nails, or salted meat). Anthropologists and historians have theorized that coopering is a direct offshoot of ship-building, since both trades require the careful shaping and bending of wooden staves. I wouldn't be too terribly surprised if the trade evolution didn't travel in the other direction, and coopering led to the development of complex board-bending in the ship-building trade. We'll probably never know. But in my experience these sorts of technology things tend to scale UP, not scale DOWN, meaning it is far more likely to me that someone was looking at a barrel maker and thinking "crap! that would make it much easier to build my ships!" than someone was looking at a shipyard and thinking "wow! I could really use that to develop a liquid-proof container!" Not that it matters... But beyond the simple fact of the ubiqutious utility of the lowly barrel, it turns out that barrel making itself is a significantly difficult task, which is why it was an actual trade for thousands of years. Why is it so difficult? There are two main reasons that barrels are not trivial to construct. The first is that in order to get a watertight seal, the barrel maker has to carve and shave the staves to very high levels of accuracy. Most traditional barrels did not use any sort of adhesive to keep the staves together, instead they relied on the tightness of the joins between the staves and the fact that wood swells when it gets wet, which means that the container is essentially self-sealing if the staves are sufficiently well joined. Secondly, since the liquid being transported soaks into the barrel staves, any sort of adhesive leeches out into the liquid. Since one of the main purposes of barrel making since antiquity to the present day is to store and transport alcoholic beverages, using adhesives taints the flavor (and potentially potability) of the beer, ale, wine or bourbon being transported. So no adhesives, please. The other thing about barrels that is perhaps not clearly understood is that they are shaped the way they are for a very important reason. Barrels are designed to be transported with the minimum amount of effort possible. That means they are designed to roll. But a simple cylinder would "roll" just fine, so why does the barrel have it's distinctive "barrel" shape, with the convex belly? Well, because that turns out to be the optimal design for a contanier which can be rolled and turned in any direction with a minimum of effort. A cylinder of sufficient size and weight is very difficult to turn around a corner, and will create enough friction that it would eventually wear huge gouges in warehouse floors. Barrels can turn on a dime, allowing them to navigate through warehouses, up ramps, onto ships, etc. It was the development of barrels which allowed for trade to carry massive amounts of beer, ale, salted goods, etc across the ancient world. Not just because the containers were waterproof (although that is a huge consideration) but also because they could be loaded and unloaded with a minimal number of workers, with the maximum amount of maneuverability. In short, barrels are an amazing technological development and I suspect if anyone really delved into the anthropology and history of them, you would see civilization following barrels across the world. I don't think that's a coincidence...