Cosmic Conservative

Rational Conservatism from the heart of America

Why can't Romney campaign?

By CosmicConservative
I am continually perplexed by the near ubiquitous lack of campaign smarts that Republicans display over and over an over again. It is a wonder any Republicans get elected at all they are so miserable at the whole "message thing." I am not kidding when I say I simply can't comprehend it. The field of ideological battle is swimming in campaign opportunities, yet Republicans again and again and again simply refuse to pick them up and run with them. McCain was so bad at it in 2008 that I gave up on the McCain campaign just about the time he cemented the nomination. But I thought Romney might be better. And I guess he actually has been "better" than McCain, but that's sort of like saying your meatloaf tastes better than dog shit. OK, maybe it does, but it still tastes terrible. Romney appears to be running a campaign based on personality. He hasn't made a single compelling ideological case in his campaign so far. When he has strayed briefly into the ideological realm, his numbers have jumped, and yet he drops the ball, walks away and starts looking at himself in the mirror again. Or something. I don't know what he's doing, but he's not advancing the ideological agenda. Not at all. The recent news cycles have given Romney a veritable treasure trove of ideological issues he could hammer Obama with, but he ignores all of them. Fast and Furious is totally ignored. Romney seems to accept the Obama argument that the economic malaise that has gripped this country is not really Obama's fault. It's the fault of out of control banks, incompetent European leadership, the implosion of the housing market, whatever... But what I don't hear from Romney is what I believe to be not only the ideological argument that will win the day for Romney, but also the absolute truth. The economy is suffering because of the anti-capitalist, collectivist, crony-based, corrupt Obama economic policies. Massive taxes, historically alarming deficit spending, massive new unfunded social programs, hundreds of billions of dollars thrown at political insiders who have wasted our money, etc... But Romney doesn't make the case. He doesn't attack Obama on the economy. He agrees with Obama's surrogates on Obamacare's tax/non-tax status. He ignores Fast and Furious, Solyndra, foreign policy disasters all over the place, crushing new regulations, unprecedented use of executive powers to write new laws, etc. etc. etc... It is amazing to me that Romney is even still in this race. That only shows how thoroughly horrible Obama is seen to be by a very large number of Americans. I suppose I should just accept this state of affairs. I have said for two years that this election will not be about any Republican, the Republican candidate could be Daffy Duck and we'd see similar numbers. This election will simply be about whether the American people have the brains required to fire the man who is systematically destroying everything this country once stood for. Right now I'd say the odds are in Obama's favor. Which, from a purely objective historical perspective, is probably fine. This nation is so overrun with idiocy, selfishness, rudeness, entitlement mentality and just plain uncivility that it probably deserves to have Obama drive it into an early grave. It doesn't look like Romney has the campaign savvy to stop it. It's Obama's to win or lose.

The high cost of gas

By CosmicConservative
No, this isn't a political post. This is another pellet gun post. :) Now that I have joined the ranks of PCP ("Pre-Charged Pneumatic") pellet gun enthusiasts (and I am enthusiastic), I am learning that there are three main costs to this hobby. The first is, obviously, the gun. The second is the pellets. The third is the air itself. There's no such thing as free high-pressure air. I know that's hard to believe, but while we may be figuratively swimming in free air 24 hours a day, unfortunately all of that air is at around 14-15 pounds per square inch, which will send a pellet at exactly zero feet per second. The air that you need to use a PCP pellet gun is air at 2,000 - 3,000 pounds per square inch. You can't find air at that pressure just laying around. In fact, prior to the rise of the paint ball gun industry the only real place to find air compressed to up to 3,000 psi was in SCUBA tanks. While there were a few high pressure air pellet guns (and in fact, high pressure air guns have been in existence for several hundred years), there was no real consumer market for them. The creation of the paint ball (or "airsoft") industry changed all that. Paint ball guns became so popular that stores started popping up all over the place. It wasn't long before some players realized that they could use SCUBA tanks to extend their game play. It wasn't long after that before someone realized they could store air in tanks up to 4,500 psi and regulate the output for consistent shots for hours before having to refill their guns. So now there are two places you can get high pressure air, SCUBA shops and paint ball gun shops. (Actually there are three, many fire departments have high pressure air compressors to fill their "scba" tanks, which are air breathing tanks that are not designed for underwater use but are designed to allow firefighters to breathe in the midst of a smoke-filled building. But it is considered poor form to go to a firehouse and beg for free air. However, if you ARE a firefighter, you might have a leg up on this hobby.) Or, of course, you can buy a hand pump and pump your own high pressure air up to 3,600 psi (there may be hand pumps that will pump higher, but I haven't seen one). And just in the past few months a product has come available that is specifically designed to pump high pressure air for paint ball or PCP airgun purposes. All of these have costs though. And all of them have their advantages and disadvantages. One way to compare the different options is to measure it in terms of cost per gun tank refill. My hand pump cost $200. Until it wears out (and it will, according to the online folks who would know) then every time I use it, my cost per refill will go down. So far I've refilled my tank three times. So right now my cost per refill is $66. That's a lot. But let's say that I really get into the sport and I shoot enough that I need to refill a tank about twice per week, or 100 times per year. That means in a year refilling the tank will cost $2 per refill. That's pretty cheap. A SCUBA tank costs about $250 (including regulator and valves). A refill of a SCUBA tank costs about $15. According to what I've seen online, a typical SCUBA tank will fill about 20 airgun tanks before the SCUBA tank needs a refill itself. Sticking with the same 100 refills per year, that means refilling the SCUBA tank itself 5 times, so a total cost of $325. That means a tank refill cost of $3.25. Finally there is the "Shoebox Air Compressor" which is a product that you can use to fill tanks yourself. Ignoring the cost of the electricity involved, the product costs $550, but there's a catch. The compressor requires compressed air to work, so you need 80 PSI air input before you can reach 3,000 psi output. So you have to have some means of providing the incoming 80 PSI. The cheapest way to do that is to have a SCUBA tank which you use to deliver 80 PSI regulated air. So taht's another $250. So total of $800. Or $8 per tank refill. Compare that to the $3-$5 cost of a tank refill if you go to a paintball store and have them use their compressed air to do it. Now, those are all a one-year cost. The costs change considerably if you participate in the hobby for multiple years. For a five year comparison the prices of each option approach a steady state of about $1 per refill. That's because you'll have to replace or rebuild your hand pump since they wear out, you'll have to recertify or replace SCUBA tanks and you'll have to do maintenance on your shoebox air compressor. The hand pump will always be the cheapest, but eventually it becomes a matter of maybe $.25 difference per refill. At that point the question becomes "what is more convenient?" Well, it's pretty obvious that the least convenient way to do it is to use the hand pump. Even just topping off the tank after shooting 20 or 30 times is a chore. It took me 50 pumps to restore the tank to full status after shooting fifteen pellets. So on average it's about three pumps per shot. If you are shooting A LOT, then you'll be doing a lot of pumping. It's not exactly clear which of the remaining approaches are more convenient. The SCUBA tank approach allows you to take the SCUBA tank to a shooting location and refill from the back of your car or truck. The "shoebox air compressor" needs electricity, so it's very convenient at home, but not very convenient on the range. Plus the air compressor takes up to an hour to refill a tank while you can refill a gun tank from a full SCUBA tank in about fifteen seconds. So... most serious shooters are moving to a combination of the SCUBA tank AND the shoebox air compressor. Meaning they buy TWO SCUBA tanks, one to use as a regulated 80 psi input for the compressor, and one to fill up and carry to the shooting location for refills. So that's basically a $1,000 initial investment. So... The question is whether there might be a market for some device which is cheaper than any of the existing options PLUS is portable and battery operated. If you could design and produce such a device at a $500 price point, PCP and Paintball gun owners would be beating a path to your door.

First "group" with Condor at 25 yards

By CosmicConservative
OK, so I have "group" in quotes because I was actually still playing with the scope elevation and windage settings while shooting this. This is eight pellets. On one pellet I twitched as I pulled the trigger. Well, I probably twitched on all of them, but I twitched enough that I noticed it. That is the "outlier" pellet in the group. Group size is measured center-to-center so the size of a group is defined as the largest distance between any two pellets' centers. In this case, measuring with the outlier pellet, it's a 1 1/8" group. Measuring without the outlier it's a 7/8" group. In general a 1" group is considered "lethal". Not great or awesome or anything to really brag about, but "lethal" is good enough for me. Now, I do think that my next group will be tighter since my last couple of shots in this group were right in the same spot, and right on the center crosshairs. So While I 'sighted it in" roughly on Thursday night, now I've "dialed it in" and feel that at least at 25 yards, I can hit pretty much anything I need to. Of course now I have to pump up the tank again.... sigh.

Entire industry wiped out by stroke of Obama's pen

By CosmicConservative
The "Roll Your Own" (RYO) cigarette industry is no more.
A tiny amendment buried in the federal transportation bill to be signed today by President Barack Obama will put operators of roll-your-own cigarette operations in Las Vegas and nationwide out of business at midnight. Robert Weissen, with his brothers and other partners, own nine Sin City Cigarette Factory locations in Southern Nevada, including six in Las Vegas, and one in Hawaii. He said when the bill is signed their only choice is to turn off their 20 RYO Filling Station machines and lay off more than 40 employees.
There is a morality tale here. This is classic power politics. Track this back through the process and you'll find the fingers of cigarette manufactures all over this. Now, it is a little known fact that I, Cosmic, used to be a smoker. And at first I used to smoke "Marlboro's". But anyone who knows me knows how I deal with hobbies. Soon, after falling in love with books written by Louis L'Amour, I found myself intrigued by a scene in one of L'Amour's books where the protagonist rolled his own cigarette with one hand, while holding a gun on the villain as I recall... That seemed to be a very practical skill to me for some reason. So I began buying chopped tobacco and "Zig-Zag" cigarette papers. Back then you could buy "Zig-Zag" papers anywhere. Even if you were 15 or 16 years old, which I was at the time. So I learned how to roll my own cigarettes. And, yes, eventually I did master the "one-handed rolling" technique. It's not really that hard. At the highwater mark of my cigarette rolling career, my cigarettes were as round and firm and regular as any commercially purchased cigarette. One trick was to use a piece of paper (usually a dollar bill) to tighten up the roll for a near-perfect cigarette. I didn't smoke long. Maybe not even a year. And I haven't rolled a cigarette since. I suspect I could still do it, it's not hard. Something about me always regrets not using a skill I once mastered... So even though I don't smoke now, I still find myself wanting to roll up a cigarette from time to time just to see if I can still do it.

Poll results so far

By CosmicConservative
So, it's been a week now since John Roberts betrayed conservatives and the Constitution. Let's see how those polls are looking. The main poll I follow is the one that has been the most accurate in predicting election results for the last decade. That's the "Rasmussen Reports" poll. In this case more specifically it's the "Daily Presidential Tracking poll." That page lists two polls, Presidential approval/disapproval and Obama vs. Romney "likely voter". The Rasmussen poll is generally more accurate in predicting elections because Rasmussen uses a proprietary algorithm to predict voter turnout based on a bunch of variables including voter enthusiasm, party affiliation, geography, etc. So it won't match "public opinion" polls which tend to show Obama still having a significant lead over Romney. Right now Mitt Romney is still leading Obama in the Rasmussen poll 46% to 44%. That sounds good until you realize that last Wednesday Romney was leading 48% to 43%. So... I had predicted that the Roberts Betrayal would end up boosting Obama by 'double digits'. So far it's boosted him three points, going from down 5 to down 2. And I still think the decision is still registering with people. Still, it's fair to say that I may have overestimated the positive impact on Obama's numbers. But clearly it has had NO negative impact on Obama at all. So those who believed the ruling would give Romney a boost don't yet have any evidence to support that, and in fact Romney's numbers have dropped even more than Obama's have risen. Perhaps the ruling isn't having the major impact either side expected. Still, as of this moment it certainly appears to have been more negative for Romney than positive.

More on the Condor Bounty Hunter

By CosmicConservative
So I had an early, early morning meeting this morning so had to go to bed early (I'm working on an international project now and the project lead is in London, so lots of early morning meetings....) So I didn't have time to really put my thoughts down about the new pellet gun. In case I need to remind you, this is the gun I bought: It is not cheap. The gun itself is over $500, and with all the other stuff you need, it ended up being pretty close to a grand. Yes, I know. I am insane. I do this sort of thing about once every five years or so... The Cosmic Wife says my biggest problem is that I have champagne tastes and a beer budget. She's right. When I get interested in something I find it very difficult to accept less than a top of the line item. That's why I own the most expensive 92mm apochromatic refractor telescope in the world... I tried this time. I really did. I decided that I would go with the "mid-range" option for pellet guns, which is the "break barrel" design and after tons of research and discussion with the "experts" I ended up buying what was supposed to be the best match of accuracy and power in the break barrel arena, but I just couldn't shoot the damn thing straight. Plus the shock wave from the recoil was tearing the gun apart. Literally. Parts were falling off and breaking. So I decided to go up one level to the PCP realm. Unfortunately that more than doubled the cost. Oh well. Forgetting all the irresponsible financial escapades involved, I'd rather just talk about the gun. I had asked Pyramyd Air to set the gun up for me, something they offered to do at no charge after all the grief I had with the Hatsan models. So it came to me pre-assembled and shipped in my previous gun case. It was also pre-sighted in, but at 10 meters (which is what their in-house shooting range is set for). But, because the air tank is a Department of Transportation certified high pressure gas container, it has to be shipped empty, so they had vented all the air out before shipping it to me. Meaning I had to spend 90 minutes or so pumping it up. Most of that 90 minutes was me resting between 50 pump sessions so that I didn't do anything stupid like throw my back out. Plus I wasn't in any great hurry and I had expected to have to fill the tank up one pump at a time. I did manage to get the tank filled up to about 2,600 psi well before sunset though, which was my real goal, so I was able to go outside and shoot it. I did set it on the lowest setting. This was for a couple of reasons. First, the only really negative comment about these guns that I saw on the boards was that it was supposed to be loud. "As loud as a .22 long rifle, if not louder!" was a pretty common comment on the boards. Shooting at lower power means less of an air shock wave, so less noise. Secondly, shooting at a lower power means you use less air, meaning you get more shots. That is especially attractive to someone who just spent 90 minutes pumping up an air tank. And finally, I am in a residential neighborhood, in spite of it being in a rural town with large, tree-infested yards. So I didn't really want any ricochet that might happen to have any more power than needed. So at the lowest power I took my first shot. I use a "bullet capturing device" when I target shoot in my back yard. It's basically a box made of thick steel which is designed to contain a .22 long rifle bullet. The back of the box is angled so that the bullets or pellets hit the back and ricochet down into a capture area where the lead is supposed to settle so you can recover it and remold it into new bullets or pellets. (Yeah, I'll probably eventually get to that point...) So I used a bit of construction paper with a little self-adhesive "bullseye" that is about the size of a small coin. The first shot was a bit off because the trigger was much, much lighter than I expected. So it went a bit right, but was way high, probably three inches high, which is pretty dang high for a 20 yard shot. Plus it made a really loud sound when the pellet hit the steel box. Much louder than the report of the pellet gun itself. So I dialed down the scope quite a bit and set up a small piece of 3/4" plywood in front of the box, figuring the plywood would either stop the pellet or reduce the speed so much that the "blaanggg!" of the pellet hitting the steel box would not be so loud. The second shot was just a bit more than an inch high, and made a satisfying "THWOCK!" sound when it hit the wood. That pellet completely penetrated the plywood, but remained embedded in the shattered back side where it came out. So I dialed down the scope a bit more and took another shot. In all it took me four shots to dial in the scope. I took one more shot to be sure that it was really dialed in, for a total of five shots into the plywood. By then the back of the plywood looked like it had been hit with a grenade or something. Some of the shots had cleanly penetrated the plywood, but a couple had just barely remained in the wood. Remember, this is on the LOWEST power setting. Now, I had shot at that same piece of plywood with my Hatsan before sending it back. Keep in mind that the Hatsan 125 is considered one of the, if not THE, most powerful .25 caliber break barrel gun on the market. The pellets from the Hatsan had never penetrated all the way through. They were embedded in the plywood but had barely even made a bulge on the back of the board. So the Condor, on its lowest setting, was already blowing the Hatsan away. And I was using lighter pellets with the Condor too, meaning they delivered less impact at the same muzzle velocity. The bottom line is that I am very, very pleased with this gun. Right now the only thing I am less than thrilled about is that I have to disassemble the stock and tank to refill the tank. They do sell a tank that has a refill valve that you can refill without undoing the tank. I'll probably end up getting one of those.... They cost about $100 or so... Sigh.... But the gun is sweet. :)

The Bounty Hunter

By CosmicConservative
New Air Force Condor "Bounty Hunter" model came in today. Took 90 minutes to pump the tank up to 2,500 psi. Took it outside and put it on its lowest power setting. Oh. My. God. Four shots to sight in. Hitting dime-sized bullseye at 20 yards. Trigger is sweet. Scope is great. Shooting through 3/4 inch plywood with .25 caliber pellets. Sounds like a bomb going off when it hits the wood. Splinters fly, it's just awesome! I think I'm gonna like this gun.

Andy Griffith has died

By CosmicConservative
Sad day. I will have more thoughts tonight. UPDATE: OK, so I didn't get this done last night. So sue me... Many conservatives are leading their Andy Griffith comments by bemoaning Andy's 2010 televised Obamacare appeal. I think that's a shame both because Andy Griffith has every right to hold and express opinions on politics, and because his politics have very little, if anything, to do with his cultural impact on this country and the world. I always believed that Andy Griffith was one of the least appreciated actors in Hollywood. He was routinely lauded for his amiability and his appeal to multiple generations of Americans. This is one of those cases where being a nice guy actually hurts a guy's professional reputation. My first memories of Andy Griffith are, like most people's, from "The Andy Griffith Show" where he played amiable, common-sensical Sheriff Andy Taylor. But before he landed that iconic role, he had key roles in a few major movies, most notably "No Time for Sergeants" and "A Face in the Crowd." He also starred on Broadway, losing the Tony Award to Jackie Gleason for the titular role in "Destry Rides Again." I've seen both "No Time for Sergeants" and "A Face in the Crowd" and in both movies Andy demonstrates powerful acting skills. One of his co-stars in "No Time for Sergeants", in a minor role as a psychologist I think, was a young Don Knotts, who at that time was a major stand-up comedian with regular appearances on national talk shows. They became good friends, and would remain good friends for life. When given the lead role in "The Andy Griffith Show" he immediately called Knotts and convinced him to take a role as his "cousin" and deputy. The role was originally conceived to be a small role because the shows writers had intended to showcase the comedic talents of Andy Griffith. But Knotts' portrayal of bumbling, megalomaniacal Barney Fife was so hilarious that Andy himself soon lobbied the writers to change the shows theme to allow Sheriff Andy to play straight man to Deputy Fife's over-the-top antics. This self-effacing tendency of Andy Griffith is a hallmark of his career. He truly seems to have been a humble man who was proud that Don Knotts' portrayal of Barney Fife was routinely nominated for and won Emmy Awards while Andy himself was never even nominated for an Emmy. In the middle of the show's run, when Don Knotts' fame was at its height, Knotts attempted to leave the show for good as his Hollywood movie career shot into the stratosphere. At one point Don Knotts was the highest paid actor in Hollywood. Andy convinced him to continue to do guest shots on the Andy Griffith show and the two remained good friends though Andy's own Hollywood movie career never really took off. Several years after the end of the Andy Griffith show, after a series of movies and other TV shows that kept him employed, but not on the A-List, Griffith again hit paydirt with the country lawyer show "Matlock." I never watched Matlock, so I can't really say whether it was good TV or not. But again Andy's contributions gained little beyond public acclimation and while others on the show were nominated for awards, Andy was not. The few acting awards that Andy did manage to acquire over the years were usually due to character acting roles in movies or TV miniseries. He finally received his only Emmy Award nomination for a TV movie I never even heard of. Yet throughout his career Andy was beloved by the public. He may not have received critical acclaim or awards in Hollywood, but throughout the country there are streets named after him, community events based on his TV shows, a Martin guitar was made in his honor, etc. And George W. Bush bestowed the "Medal of Freedom" on him in 2005. Andy will be missed. Asked once about his legacy, and what he would want people to remember about him, in his typical fashion he demurred, finally simply saying something like "I tried to entertain people. If people enjoy watching tapes and films I've made, that's enough for me." RIP Andy.

Yet another pellet gun post

By CosmicConservative
.... because posting about pellet guns is not remotely as depressing as posting about politics... So.... some thoughts on accuracy. I am probably crazy when it comes to accuracy. My expectations are probably totally out of whack with reality. Especially when you consider all the variables that go into shooting a pellet 30 yards or more downfield. How accurate is "good enough?" Well, for most purposes "good enough" accuracy is defined as "1 inch groups". That's because the "kill spot" on most small game animals is about the size of a 1" diameter circle. Even larger game sometimes have small kill spots too, and obviously more accurate is always better than less accurate. "Aim small, miss small" is a maxim in shooting that has been true since people first started launching sticks into the air with atlatls. Some people aren't happy with 1" groups though. Particularly at close distances like ten meters (which is an Olympic sport, btw... the US has a 10m pellet gun team competing in London this month). Serious shooters expect to have groups well below 1/4" at ten meters. Obviously that's not much room for error, considering the following: 1. Pellets are rarely uniform. Even the best commercially available pellets are produced through the use of multiple pellet molds, and as such, even if each batch was molded and de-molded perfectly, there would be differences in weight and size just due to the differences in the different molds. Add in the tendency for cast metal to have flashing, bubbles and other defects and it's amazing that there is any consistency at all. It is not uncommon for the weights of commercial grade pellets to vary by as much as 10%, and the same is true for size. 2. Air pressure is rarely consistent. This is actually a big problem. PCP guns tend to operate at 2,000 - 3,000 psi air pressure. Air reservoirs are not highly sophisticated devices. In fact they are generally nothing but a bottle with a valve on top. The valve is held closed by a spring. When you want to put air into the bottle, you push down on the valve to open the airway and then force air into the bottle until it's full and then you allow the valve to close. To get air out of the bottle you do the same thing. (Some bottles actually have an input and an output valve, but those are more expensive bottles). So the way this works is that you "tap" the valve to open it for a split second, which allows a burst of air to come out before the spring slams the valve shut again. The way most guns do this is with a "hammer" which slams against the valve. The hammer is cocked by compressing a spring and when you pull the trigger the spring is released, the hammer flies down a tube and smacks the valve, the air is released and flows into the breech where it then propels the pellet down the barrel. How much air is released, and how fast, is determined by the speed and weight of the hammer, the distance the valve has to travel, the air pressure inside the tank and the size of the airway in the valve. Each time you hit the tank the air pressure is reduced. Most guns get about 15 to 20 shots before the air pressure in the tank is reduced to the point that accuracy suffers and you have to "top it off" again. One reason I got the AirForce gun is that they use a massive air reservoir which allows for many more shots in the "sweet spot" before you have to pump more air into the tank. 3. All of the things that normal guns have to deal with come into play as well. How is the scope mounted? Is the barrel straight? (No barrel is actually straight, in fact determining the direction of barrel bend is part of the job of gun builders.) The trick is to have the barrel's bend be in line with the scope or barrel sights. Gun barrels are graded the same way fishing rods are, their natural "bend" is marked and the barrel is mounted on the gun with the natural bend set so that the projectile won't "drift" when fired. Other things that come into play are torque, vibration, flexture, etc... So... considering all of this, how the heck can you shoot accurately? Well, all of the things in #3 are well known and have solutions that have been in place for firearms for hundreds of years now. So that leaves items #1 and #2. For #1 serious shooters grade and separate their pellets by weight and size. Yes, they do. Seriously. They use digital scales to weigh each pellet and they use different techniques to separate according to size. Then they put the graded pellets in tins with the weight and size marked on them. Plus they clean the pellets, removing all flash, discarding all malformed or incomplete pellets and they even wash them and in some cases lubricate them. (Some shooters believe lubricated pellets gain up to 10% more velocity than un-lubricated pellets). For #2 the only real solution is what is called a "regulator." Yes, that's the same thing that scuba tanks use, and it serves the same purpose. A regulator changes the outgoing pressure of a tank from whatever the internal pressure is to a consistent pressure. Usually the regulators in use are set to 2,600 psi or something like that. A good regulator will allow the gun to have nearly identical air pressure and air volume shot after shot until the internal pressure drops below what the regulator is set at. Regulators ain't cheap. A decent one can cost well over $200. But serious shooters use them. Most shooters who use regulators also use 4,500 psi tanks, which are usually carbon-fiber and very costly, but they provide a lot more shots. Really, REALLY serious shooters use what is called a "tethered" system. Instead of using a portable air reservoir bottle, they have a huge scuba tank and a regulator and run a long tube from the scuba tank to the gun. This allows thousands of shots at the same pressure before the scuba tank needs to be refilled. So... am I gonna grade my pellets? Am I gonna buy a regulator? Dunno. Let me see how the gun works first. But if I ever get really serious about this... mebbe so.