Hobbies
Get your tail outside, now!
By CosmicConservativeSeriously, grab a pair of binoculars and go look to the northeast with them. If you know where Perseus is, then look just below Perseus.
You can't miss it. It's frickin' HUGE.
Go see the comet. Take your kids outside to see it.
Comet Holmes' Coma Expands
By CosmicConservativeI have been remiss in my duties as the Cosmic Conservative....
Check this out. And go outside with binoculars and see if you can find this comet. This is really cool, I've been stargazing for 20 years or more and have never seen a comet behave like this.

APOD: 2007 October 30 - Comet Holmes' Coma ExpandsMaybe Dennis (the menace) Kucinich has the explanation. Here's a pic:

I sprained my brain
By CosmicConservativeSo yesterday about 4:00 or so I started developing this massive headache. I took a couple advil and after a few hours it was back, worse than ever. So I took a couple more, and a sleeping pill so I could get to sleep. Well, this morning it's back.
The pain is located inside the right part of my skull, just behind and above the ear, and about an inch or so inwards. I took a couple more advil this morning, and I typically do not take pills for headaches. I may have to go out to my car and get a couple more if it doesn't stop aching.
I think I know what caused it.
I think I pulled a few axons or maybe I sprained some dendrites in the right cerebral cortex. It feels like about a third degree sprain.
I think I pulled it trying to be artistic. I hardly ever use the right side of my brain, in fact I typically just leave it home when I do things because I so rarely use it, and I figure why go to all the trouble of getting it all cleaned up and dressed if it's just going to be bored anyway.
But the last week or so, and particularly the last two days, I've used it extensively. I think that's the mental equivalent of sitting on my behind for six months, and then trying to run a marathon. Anyway, I'm going to try to not use it for the rest of the day and see if the sprain starts to heal up.
Ouch... I shoulda known better, I shoulda done some pre-workout brain-cell stretching exercises. Maybe I should have tried to write a few limericks or something before putting such a high demand on it. Oh well, live and learn...
Another whack at Yleris
By CosmicConservativeOK, I took Dadman's advice (again).
The left image is the original Yleris, the one on the right is the new one. I'm not done yet, I still need to polish it up and add a quiver, perhaps some other stuff, but it's progress (I hope).

In general I like the new one better, but I do need to polish a lot, the armor plates are too thick in some places, and I really do like the face on the original Yleris...

Another attempt to draw
By CosmicConservativeSo, I was fairly pleased with how my "Falyn Featherlight" drawing came out after Dadman's suggestions. So I decided I'd try to draw another of my D&D characters. This is her:
I probably worked on this more than I did the Falyn one, but so far I'm not liking it. I don't like the quiver strap going across her chest, I think her hair is a bit asymmetrical, I can't decide if the proportions are correct....
Sigh, any thoughts would be welcome.
I probably worked on this more than I did the Falyn one, but so far I'm not liking it. I don't like the quiver strap going across her chest, I think her hair is a bit asymmetrical, I can't decide if the proportions are correct....
Sigh, any thoughts would be welcome.Spring in the Rockies
By CosmicConservativeI wish I had taken my camera with me yesterday when I went to check out one of my favorite mountain lakes to see if it was open for fishing.
The snow was still pretty deep across the road in several places, and in fact in one place a fancy Toyota 4x4 was high-centered in the snow. The Cosmic son and I got out and looked around to see if anyone was around, or if they needed help, but there was nobody there. The back of the pickup was full of fishing gear, jackets and coats, but there wasn't a soul around.
It made me think of stories like this that are in the news from time to time. Some sort of people-sucking dimensional vortex must have formed in the Rocky Mountains this weekend.
Good thing we weren't caught by it!
Making Miniatures
By CosmicConservativeHere is a series of photos (not very good, I'm afraid, I have an old digital camera with no closeup lens) showing me making a mniature character for gameplay.
This is the original wire armature. It's just copper wire cut to size with one piece of wire wrapped around three other pieces of wire to hold them together. The "staff" will be made from the wire that extends from the hand area, it's all one piece of wire just bent back on itself. This little trick makes it much easier to create figures holding swords, staffs, wands, spears, etc.
This is the wire armature, a round flat piece of clay (about the size of a penny) for a base, and a ball of clay that I'll use to coat the armature.
This is just the armature covered in sculpey clay. Very rough.
This is the same coated armature, attached to the base (just pushed down onto it is all) with some detail work done and a cloak added to it. It's starting to look like a cleric...
And here it is, baked and painted. That's all there is to it. There is some foreshortening of the image, the staff isn't really that big.
And here's a bunch of miniatures. Mostly kobolds. I've got some others I didn't show in this picture since members of my D&D group read my blog and I don't want them to see some of the surprises I have for them. The cleric I just made is to the left of the dragon so you can get some idea of the scale. Most of the miniatures are around 1 inch to 1.5 inches in height. Which is sort of bad since they should all be more or less exactly one inch for human figures. The kobolds should be about half that size, and many of them are larger than the human figures. But it's a game of imagination, right?
There is one miniature that I bought and painted, the rest I made from scratch. See if you can figure out which one it is. ;)
The three front and center (the green-haired female, the black and red wizard and the white-haired wizard) are characters I play in campaigns. The rest are NPCs in campaigns I run. The newborn cleric might be one of my characters too, I haven't decided yet.
That's it. Nothing to it really. Not that this is anything to brag about, but there it is. The figure shown here took me about 30 minutes to make and paint, with an additional 15 minutes with it in the oven curing.
The Cosmic Utility Belt
By CosmicConservativeSo my earlier post about spidey-trackers and Batman's utility belt got me thinking.
I need a utility belt. I need something to carry all the gadgets and goodies I need with me, and my wallet's prime function seems to be to wear holes in the back of my pants when the rest of the pants still look brand new.
So I am trying to design the "Cosmic Utility Belt" or "CUB".
Here is what it needs to hold:
- All the stuff in my wallet, which includes these items I just realized I've been carrying around: A receipt for four tires from 2002 (the tires have long since been replaced); A folded piece of paper with a four-digit number I don't recognize and the words "Important! Do not lose" written on it; and a penny.
- iPod (first generation iPod, now seems dinosaurian in size and appearance).
- iPod earbuds and "remote".
- Cell phone (older than my iPod).
- Work ID card.
- Origami paper (2" square and 3" square) Must keep paper unwrinkled and crisply unfolded.
- Origami bone folding tool
- Keys
- Guitar picks (yes, I carry them even though I don't use them. Go figure..)
- Handkerchief
- Chopsticks (because I hate the cheap, nasty ones you get at China Village)
- Pen (and possibly pencil)
- Chapstick (essential)
- Multi-tool (one of the small ones, with scissors, not the big ones with pliers)
- Lens cleaner for glasses and computer screen
- USB flash memory stick
- Sunglasses
- Tiny digital camera (OK, I don't own one, but if I did I'd want to carry it with me for all those times I needed a camera for that Pulitzer winning photo but didn't have one.)
- Compact Roof Prism binoculars (optional I guess...)
- Place to put my glasses so they don't get scratched when I take them off.
- Flashlight (I prefer red-light ones for amateur astronomical purposes)
- Advil tablets (I suffer from headaches too frequently)
- GPS receiver (again, optional)
- Magnifying glass
Space Elevator update
By CosmicConservativeVia Instapundit: An interview with Dr. Bradley Edwards. Space elevators are the ultimate in space exploration, much like fusion energy is the ultimate in power generation. I once wrote a short story that did not get published that was a takeoff on space elevators, so I have had an interest in the technology for over 20 years.
Back then it was considered to be a pipe dream (pun intended) to pursue a space elevator. Now NASA is actually looking at the technology.
Consider a planet earth that has a series of space elevators spaced around the equator and which also has active asteroid mining under way. Refined materials (iron, aluminum, gold, etc.) would come down the elevator, which by converting gravity to electricity would provide the power to bring people, manufactured goods and trash (yes, trash) up the elevator. What kind of trash? Nuclear waste is one example of a good thing to get off the planet...
This sort of scenario describes self-sustaining space habitation, exploration and exploitation that does not require dangerous, polluting and wasteful rockets to launch stuff into orbit.
One thing that is frequently overlooked by proponents of space elevators is that one thing that is required for such a scenario to be successful is for the space elevators to be moored in places where the political environment is stable.
If I had three wishes from a magic genie, I could do far worse than to wish for cheap sustainable fusion power generation, space elevators around the globe, and a thriving industry in space. It is hard to over-estimate the long-term beneficial consequences of those three things coming to pass.
Ah, but would it cure world hunger? Perhaps not...