Cosmic Conservative

Rational Conservatism from the heart of America

Hobbies

Some photos of my painted minis...

By CosmicConservative
minis_frontSo, here are some photos of some of the miniatures I've been painting. minis_back I used a technique called the "dip method" and you can see that the red-skirted army dude ended up with a blob of varnish stuck to his sword arm. I will watch that more carefully, that means I didn't fling enough varnish off the mini after dunking it. I didn't even notice that until I took the photo. It's not nearly as noticeable with the actual minis. These are at what used to be called "24mm scale" which was the original role playing game scale since that makes a 24mm mini more or less equal to an average height human where 1" equals 6 feet (sometimes called 1/72 scale). Modern RPG has experienced mini scale creep and the current standard for games like D&D, HeroClicks, WarHammer and others is actually 30mm, so these are actually 20% smaller than the modern standard (which is likely why I was able to buy about 400 minis for such a cheap price) which is quite noticeable. I intend to mount them on thick bases to try to minimize the obvious size differences when using them in actual games, but I am worried the size difference will be distracting. Still, I've learned a ton about mini painting. If I had sets of 30mm miniatures, I think it would feel like painting giants after painting all these.

Where has Cosmic been?

By CosmicConservative
Well, I've been busy painting. I bought a bunch of cheap (not low quality, just cheap) miniatures from Taiwan (about 400 in all) and have been painting them for the past several days. Painting and painting and painting. I will post pics when I am done.

What D&D Character am I?

By CosmicConservative
I Am A: Lawful Good Human Wizard (7th Level)

Ability Scores:
Strength-13
Dexterity-17
Constitution-14
Intelligence-17
Wisdom-16
Charisma-14

Alignment:
Lawful Good A lawful good character acts as a good person is expected or required to act. He combines a commitment to oppose evil with the discipline to fight relentlessly. He tells the truth, keeps his word, helps those in need, and speaks out against injustice. A lawful good character hates to see the guilty go unpunished. Lawful good is the best alignment you can be because it combines honor and compassion. However, lawful good can be a dangerous alignment because it restricts freedom and criminalizes self-interest.

Race:
Humans are the most adaptable of the common races. Short generations and a penchant for migration and conquest have made them physically diverse as well. Humans are often unorthodox in their dress, sporting unusual hairstyles, fanciful clothes, tattoos, and the like.

Class:
Wizards are arcane spellcasters who depend on intensive study to create their magic. To wizards, magic is not a talent but a difficult, rewarding art. When they are prepared for battle, wizards can use their spells to devastating effect. When caught by surprise, they are vulnerable. The wizard's strength is her spells, everything else is secondary. She learns new spells as she experiments and grows in experience, and she can also learn them from other wizards. In addition, over time a wizard learns to manipulate her spells so they go farther, work better, or are improved in some other way. A wizard can call a familiar- a small, magical, animal companion that serves her. With a high Intelligence, wizards are capable of casting very high levels of spells.

Find out What Kind of Dungeons and Dragons Character Would You Be?, courtesy of Easydamus (e-mail)

Hobbies and obsessive compulsive behaviors...

By CosmicConservative
So. I think I mentioned a few posts ago that I have been posting less to the blog lately in large part because I have been fiddling around with making miniatures for my role playing game hobby. I suppose it's time to come clean and reveal just what an obsessive/compulsive freak of nature I can sometimes be. For the past month I have been spending far, far too much of my free time working with styrofoam, poly clay, epoxies of various consistency, paints, cardboard, foam core, foam and other materials creating components for use in the miniature world of role playing games. In that month I've made roughly 70 miniature figures of various fantasy creations, ranging from the "hill troll" I just posted yesterday to a six dwarf "road crew" who are working with shovels, picks and hammers to build a road in the fantasy realm where I run my RPG campaigns. As of last night I have painted 45 of them, meaning I've got about two dozen left to paint that I hope to complete tonight. I guess I'll get those taxes done tomorrow.... On top of the miniatures I've also created three custom terrain elements which I use as the "battleground" for the RPG encounters in the gaming sessions. Those include about a dozen individual trees I've made as well as several rocks and boulders of various sizes. During this blizzard of miniature world creation I've spent at least a couple hundred dollars on materials for creating all this stuff. Those materials include silicon and latex mold making materials which I've used to create replicas of a few of the miniatures I've been making, and which I expect to use to make lots of copies of furniture to fill out the four story palace I am creating out of foam core posterboard. Plus, this weekend, I purchased $100 worth of miniatures from eBay to fill out my collection. That $100 bought me 350+ miniatures of various types. (The "+" is because some of the boxes I ordered have the potential for random "bonus" miniatures which are not included in the base count and may or may not be present in the boxes.) Those I bought are mostly ancient army miniatures used for historical displays, but which happen to be the same scale (1/72) as the miniatures used for gaming. I bought a box of Roman legionnaires, Mycenaean warriors, Hittite warriors and Celtic warriors. I also got some medieval knights, some monsters and some dwarves and elves. All are unpainted, so will have to be painted when they come in. Last night I spent about 90 minutes painting roughly two dozen miniatures. If that's a reasonable rate, then that means I was painting one miniature about every three minutes and 45 seconds. That means to paint the ones I just bought will take 24 hours of painting. I guess that's not that terrible, spread across two weeks I suppose that would only take an hour or two each night... So why this sudden burst of effort in creating, painting and even purchasing miniatures and building terrain? I dunno. I have just started running a new campaign of my own for the first time in a while, and I suppose that's the fundamental reason for all the activity, but I could run the campaign without all the new miniatures and I've never used terrain before. No, the truth is that this is sort of what I do. I get caught up in some totally irrational interest and suddenly that's all I want to do. I've gone through this many, many times in the past. I went through my building telescopes phase. I went through my tie every fly known to man phase (yes, I mastered several ancient salmon fly patterns such as the "Jock Scott" or the "Green Highlander"). See, the thing is, when I get one of these wild compulsions, I can never do half measures. I can't just get interested in telescopes and go buy a cheap telescope, no I have to learn everything I can about lens construction, focal lengths, eyepiece design and eventually cannot be satisfied until I've built my own 8" dobsonian telescope from scratch, and had it work as well as any store-bought telescope. So now I'm not only collecting miniatures, no I have to learn the intricate details of how to sculpt them, meaning I now have at least half a dozen different types of sculpting materials that I have used, some of which I've purchased at home repair stores (epoxy putty is sometimes sold as something called "plumber's putty" and it can be used to sculpt with, although it is sold as a pipe sealant usually). So I've gotten to the point that I can't sit down to watch TV without some clay or putty in my hand, making some creature or another. And I am rarely satisfied with the results, because I am a harsh self-critic. But every now and then, I surprise myself. Which I guess makes it all worthwhile in some way. The other day I was watching something on TV and was working with some new epoxy putty that I had purchased, just getting the feel for it and seeing how long you could work it before it started to harden. I wasn't trying to make anything particular, but as the hardening began, it was clear I had to either make something, or just throw it away. So I quickly made a big cat shape, but since it was already starting to set, I wasn't able to do much detail work on the face, and I made the neck too long. But it was still a serviceable cat, I thought. But over the next few days, I was less and less satisfied with it, and so I put it on my desk to contemplate what to do with it. As it happened, I had a pair of left-over metal wings that had come with some mini I had bought a long time ago, but never used, and the more I looked at the wings, and the more I looked at the half-finished cat face, the more I thought "you know, that would make a pretty nice griffon." So, since I had just received in the mail my latest new type of epoxy putty to try (called "Apoxie sculpt" if you are interested) I decided to convert the lame cat into a griffon. Well, first I had to do something about the cat's front feet, since griffons have eagle talons for front feet. So I sanded the front feet down to skinny little nubs. Then I had to remove the cat's ears. Once that was done I mixed up some Apoxie sculpt putty and set about remaking the head, chest and feet of the "cat". Well, I have to say that I was somewhat disappointed in the Apoxie sculpt at first. It retained a soft, moist texture for a long time, much longer than most epoxies I've worked with. But as it started to set, I started to see some real potential for the material. Especially for making texture like the griffon's feathers. After about an hour of sculpting, the cat was gone, and in its place was a slowly solidifying griffon. I let it set overnight and decided to paint it as a reward for painting all my other little miniatures. So last night I painted it. It came out pretty awesome. I may post a photo, although my photo taking of these things has been less than inspiring. Still, once the paint dried, I found myself quite pleased with the resulting griffon. Especially considering that it started out as a half-hearted, incomplete long-necked cat of indistinguishable species. Who knows how long this particular compulsive episode lasts. But as long as I get a few more griffon like results, I suppose I'll have to agree this is a more positive compulsion than gambling, drugs or liquor would be...

Ogre! (or maybe hill giant)

By CosmicConservative
Just messing around... giant I need to learn to paint. Plus I need a better camera. There is some foreshortening going on, the club is actually leaning back behind him and is longer, this photo makes it look like it's sticking straight up and is short. He's mean looking in real life.

Behold the Beholders 2

By CosmicConservative
OK, here's a slightly better photo. Beholders Click on the image for a more detailed version. The one on the far left is the original beholder I made. I really only made it because someone had expressed an interest in having one, and I spent maybe 30 minutes on it. Then the whole molding and casting resin bug bit me, and I decided to do a more "serious" version of it. The all-white one in the foreground is the result of that effort. It was maybe 30 minutes of sculpting that I did while watching "Top Shot" last week. I used aluminum foil as the basic shape and then used sculpey clay to do the "detail" work. Then I baked it to harden it. Then I had to build a mold, and mold building is no picnic. Still, I got one done, and from that I have cast four resin versions of the original. One of them, still unpainted, is the clear looking one in the front. Then I painted it. First I painted it without the eyestalks and thought it came out really nice. But adding the eyestalks (on the one in the middle, back) mostly hid a lot of really cool details, so I decided to do it again with the thinnest eyestalks I could. So the one on the right, back, I drilled holes into the resin and glued in some aluminum wire for the eyestalks, and then painted them. It's still not perfect, and this photo still doesn't do it complete justice, but it's a better photo than the other one.

Behold the Beholders(TM)

By CosmicConservative
OK, I know these are sucky photos, I used my webcam and a lamp for lighting, with a black piece of posterboard for background. Pretty much everything about the photo is bad. (Oh, standard disclaimer.. "Beholder" is a registered trademark of Wizards of the Coast and is considered intellectual property of "Dungeons and Dragons(TM)".) Anyway, here are two Beholders I made. Beholder1 Beholder2 The photos don't do them justice. At least I don't think so. They are really pretty nice looking in person. I used "dry brush" techniques to bring out some pretty cool detail that just doesn't show up in the photos. I need to figure out how to take better photos of my miniatures...

Making stuff...

By CosmicConservative
I've got a whole mess of craft supplies now in my "study" where I am making all kinds of stuff. I'm making stuff out of styrofoam, polymer clay, silicon, epoxy, casting resin, rocks and pepples, etc. For now I want to talk about casting resin. For those who may not know, casting resin is a sort of liquid plastic that you pour into molds to make objects. The resin comes in two parts, the resin itself, and a "catalyst" which is used to heat up and solidify the resin. The resin is smelly and a mess, but the catalyst appears to be as dangerous as plutonium based on the dire warnings on the bottle. Using casting resin will stink up a small sized country. I have been doing it in the garage to keep the odor down to a minimum in the house. I would do it outside but resin doesn't cure well in low temperatures. So the garage is the best compromise between venting the noxious fumes and having the resin actually cure so that it creates a solid object. Even when it is "cured" it still remains sticky and tacky for hours afterwards. Or even days, depending on how accurately you got the catalyst/resin ratio. The resin I've been using hardens clear, which makes for some very interesting results when you are creating casts of small "action figures". They come out looking very much like ghosts or avatars of some sort. I've been making a particular miniature called a "Beholder" (TM) which is a proprietary monster unique to the Dungeons and Dragons system. (It's actually trademarked and copyrighted by Wizards of the Coast as core intellectual property of the D&D game system.) Anyway, a beholder is basically a large floating head with a single huge eyeball, a mouth full of sharp fangs and teeth, and ten (usually) little eyes on writhing eyestalks which blast powerful magical spells at you. They are also highly xenophobic and wholly evil. So to create some beholder miniatures I first attempted to create a complete beholder and then create a mold to cast additional ones. But the eyestalks are just a nightmare to create molds for. I used latex, which is the default mold material for highly complex molds, and I was unable to demold the original without breaking the eyestalks, so I gave up on that. So I then sculpted just the head itself, and crated a silicon two-part mold for that and have cast two heads now using the mold. (I need to post some pics...) The clear resin heads are pretty freaking cool looking, resembling very much the famous crystal skulls which are still virtually worshiped by the paranormal freakazoid community. I have the second one sitting on my desk now. So now I'm contemplating what my next sculpting effort will be. In the meantime I painted the first cast beholder head last night, and thought it came out really well, but then when I added all the eyestalks, it covered up a lot of the cool detail of the head that I thought made it look so cool. So I'm thinking that my next effort will have much thinner eyestalks to keep as much of the head's coolness visible as possible. I did try to take a photo last night, but for some reason the webcam result greatly exaggerated the red parts of the miniature making it look like some sort of beholder prostitute or clown. I will try again tonight.

Making stuff...

By CosmicConservative
Every now and then I seem to get a compulsion to "do something". Usually it's nothing productive or useful, but that doesn't seem to matter to the compulsion. Frequently the "do something" is related to an existing hobby of mine. Well, that compulsion has hit again. This time the compulsion is all about making stuff for playing role playing miniatures games. Of course, I've commented on this before, the last time I had a compulsion, which was to make my own miniatures, as shown in this post: This time it's similar, but in this case I am wanting to make three dimensional terrain to make the combat encounters more compelling and interesting. Typically RPG combat encounters are played out on battle mats with either drawn in terrain, or using commercial terrain mats which have pre-drawn terrain on them. Occasionally a GM will use a few 3D elements such as stairs or a small cardboard building. Really rich GMs might purchase some of the expensive 3D gaming kits that allow you to make entire castles or dungeons out of modular 3D pieces, usually made out of plastic or resin. Of course I'm never satisfied with the store-bought stuff. Not that the stuff I make is even remotely as high quality, or remotely artistic, but it IS exactly what I need to create the encounter I want to create. One thing I really don't like in playing RPGs is when an encounter is forced to be done a certain way because of the lack of physical artifacts. I'd rather have a crude troll on the mat than an ogre that I say "pretend this is a troll." So, I've been working on creating my own terrain elements. So far I've created a couple of things that I think have come out pretty well. In one case I've simply used styrofoam which I've cut to shape using a hot wire styrofoam cutter. In another case I've used polymer clay to create a stone wall which I then baked in the oven and painted. Both came out very well. But what I'm thinking about now is taking some of the elements I make myself, especially the polymer clay ones, and using them to create latex molds and then cast multiple copies of them in resin so I can create my own modular construction kits. Just wondering if anyone who reads this blog has ever worked with molds and resin. It seems pretty simple, but I'm sure I'm missing something. I'll be trying out my first attempt as soon as I can get my hands on some clay. I've got the latex material and the resin from a project I was going to do years ago, but which I never competed. All I need is the clay to create the two-part mold so that I can mold reasonably complex shapes. Any advice?

How sad is this?

By CosmicConservative
There's a place that will make a 3D statue of your WoW character. Click on this to go to the website. I had tried to show Rhlyssa, my rogue, but unfortunately the image seems to be deleted and regenerated so it kept showing a broken image icon. $129 plus delivery. Is it sad that I would actually consider this? .